- Home
- Brand
- Aftermarket Products (8)
- Aps (54)
- Arp (239)
- Arp Bolt (28)
- Bloxsport (22)
- Bonoss (8)
- Bwa (19)
- Car (14)
- Champs Club (25)
- Coaler Systems (21)
- Ctm (18)
- Customadeonly (15)
- Ford (10)
- Gabriel (22)
- Lns Adapters (27)
- Mac Auto Parts (11)
- Mizumo Auto (10)
- Npboosted (9)
- Powermultiauto (9)
- Ten Factory (9)
- ... (423)
- Stud Grade
- Thickness
- Thread Pitch
- Type
- Adapters (3)
- Brake Disc Rotor (3)
- Cylinder Head Gasket (3)
- Grille Guard (25)
- Head Stud Kit (10)
- Head Studs (5)
- Heavy Duty (2)
- Hub Centric Adapters (2)
- Jacket (2)
- Rocker Arm (2)
- Shock Absorber Set (2)
- Shocks And Struts (5)
- Tie Rod Assembly (2)
- Wheel Adapter (4)
- Wheel Adapters (7)
- Wheel Hub (3)
- Wheel Spacer (72)
- Wheel Spacer Adapter (4)
- Wheel Spacers (28)
- ... (817)
- Warranty
ARP 12-Point Head Stud Kit Fits Ford Modular 4.6L-5.4L AR156-4301
Head Stud Kit, 12-Point Nuts. Suit Ford Modular 4.6L & 5.4L 2V/4V. It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated; theres not a better stud setup on the market today.
For openers; ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. Each stud is placed vertically in special racks and precisely heat-treated to 200;000 psi.
This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. Following heat-treat; each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part.
Its important to note that lesser quality studs are not even centerless ground the material is thread rolled in bar stock form (mostly befoe heat-treat; when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances; you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned something that wont happen with inferior quality head studs. ARP studs are thread rolled after heat-treat; which gives them about 1000% (thats ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way; because its tough on tooling; but the results are well worth the extra effort. Rocket Industries Pty Ltd ships goods Internationally and Australia wide.
Under no circumstances will parcels be left unattended or without a signature from the receiver. Bank Transfer Below is our bank transfer details.
The item is in re-saleable condition, meaning that: (a) It is in its original clean packaging, including instruction manuals and all accessories. (b) It is unopened, unused and in its original condition. Please make sure you have all the above paperwork attached to the goods so there are no delays in processing the return. Goods that are short supplied must be referred to Rocket within 7 days of receipt.
Monday to Friday: 8.00am - 5.30pm Saturday: 8.00am - 1.00pm. Rocket Industries is the largest distributor of performance products and accessories in Australia, stocking over 300 leading brands of performance parts & accessories. With brands such as Aeroflow, Autometer, B&M, Edelbrock, K&N, Mickey Thompson, MSD, Comp Cams, Simpson, JE, SRP, Weld Racing and more. We are serious about supplying you with reliability of stock and the right parts, right when you need them. Our depth of knowledge and understanding of the performance industry reflects in the pride and winning attitude of our team at Rocket. We are a genuine warehouse distributor which has been in operation for more than 30 years, stocking products from over 300 leading manufacturers from around the world. We have established supply chains from overseas which enable fast and reliable service with part sourcing without all the headaches and hidden charges. We are constantly improving customer service and investigating new products to help you keep pace with, and be competitive in the ever changing automotive market.Each individual at Rocket has a genuine passion for motorsport with many staff members have their own street machine, hot rod or race vehicle, or are pit crew associated with a team. Rocket Headquarters in Huntingwood, NSW (Australia). The Leaders in Performance Products. 30+ Years Specialist Importer of USA Brands.
Rocket Industries is the largest distributor of performance products and accessories in Australia, stocking over 300 leading brands of performance gear. The item "ARP 12-Point Head Stud Kit Fits Ford Modular 4.6L-5.4L AR156-4301" is in sale since Thursday, May 2, 2019. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts". The seller is "rocketind" and is located in HUNTINGWOOD.
This item can be shipped worldwide.- Brand: ARP
- MPN: 156-4301
- Manufacturer Part Number: 156-4301