113NM(83.3 Ft tb). 6x139.7MM / 6x5.5. Minimum Number of turns for Bolts/Nuts. Estimate arrive in 4-9 days. High-Strength Aircraft Aluminum Alloy 6061-T6, Forged Material.Brand Wheel Spacers, Real Material, Laser Material Number and Logo on Spacers/Adapters. Hard Anodized for durability and corrosion protection. Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance. Limited Life Range Tested for Wheel Bolts/Stud (1 Million Times) in accordance to ISO3800. Strength-Tested for Applications (Bolt/Stud/Nut) in accordance to ISO898-1, ISO898-6, SAE J429, SAE J995.
Anti-Rust Tested (NSS 72 Hours) for Applications (Bolt/Stud/Nut) in accordance to ISO9227. Hub Centric Design-- NO VIBRATION. Forged material possesses a better performance, they can meet the demand in different kinds of the extreme environments rally, cross-country, etc. It is not an ordinary aluminum(casting material), it is even an aluminum alloy for aircraft manufacturing, so you can rest assured to use.
BLOXSPORT used Real FORGED material, have been made laser material number(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo on spacers. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Forged parts had a 26% higher tensile strength than the cast parts. This means you can have stronger shackles at a lower part weight.Forged parts have a 37% higher fatigue strength resulting in a factor of six longer fatigue life. This means that a forged shackle is going to last longer. The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety.
Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product is always along with the test report and can bear series of test.
BLOXSPORT bolts/studs/nuts have passed test, ISO3800, 1 million time anti-fatigue test(German standard)and used Heat-Treatment working processes to improve their performance to make sure the safety during long-term use. The ordinary stud has not the flexibility and anti-fatigue performance is too bad, easily being snapped off after long-term use. BLOXSPORT insist on using the World's Largest Third-Party Testing , Tested for.
Machining Precision -- CNC Machined. The consummate data comes from constant practice, BLOXSPORT always make perfection more perfect. The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision. The surface was more smooth, increasing car driving more stable and more secure and no vibration.
How Thick Should your car fit? If you not sure which thickness you can install for your car, please use the measuring device to measure from the inside of the straight edge to the inner fender lip as below showing.Remove gad by spacing wheel and tire out to fit with fender after handing. Increased performance in wheel drive conditions, improved appearance. Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel. Add inner fender clearance, add clearance between tire/wheel and inner fender. Add clearance between suspension and tire/wheel. Increase the car wheel track, reduce the body center of gravity, reducing the body deformation. To improve vehicle stability and improve handing and other functions. To ensure that the car is more flexible, smooth and safe. To be able to make the sability of the vehicle greatly ascend. Packing with hard boxes and froth bag, all-round protection for products, you will get a better experience. Installation should only be performed by a trained professional. Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. Please take the necessary measurements to ensure proper fitment. We only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle. Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation. More and more customers believe in BLOXSPORT profession, so choose us. Safety guidelines(Minimum number of turns for wheel bolts/nuts). M12 x 1.25 = 8.0 turns = approx.
10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx.
12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2 UNF = 8.0 turns = approx.11 mm of load bearing shaft length. How much standard torque force of different lug bolts or nuts is?
M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb). More and more customers believe in BLOXSPORT's profession, so choose us. BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. , wheel spacers3mm-120mm, 1 inch etc., custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud, lug nutpassed the 1 Million times Fatigue Test, etc. We always insist on four concept respectively. Insistence on the service philosophy that safty is No.
1 and creating the value for our customers. Insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability. Insistence on the test from the third party. Insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers). (4) 40mm Mercedes G Class G Wagen G Wagon G Force Wheel Spacers Adapters 5x130.2X 35mm 5 Lug Wheel Spacers 5x120 for BMW X5 E70 F15 (07- 17) Front and Rear. 2X 8mm + Bolts Forged Hub Centric Wheel Spacers for Mercedes W211 W212 W220 W221. 2X 10mm + Bolts Hubcentric 5x120 Wheel Spacers for BMW 3 Series E36 E46 E90 F30. The item "2 Inch Thick Wheel Spacers 6 Stud 4Pc fit Ford Ranger T4, T5, T6, T7, Wildtrak, XLT" is in sale since Saturday, November 18, 2017. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Wheels, Tyres\Other". The seller is "bloxsport" and is located in Guangzhou, Guangdong. This item can be shipped worldwide.